Skip to content
Prime Surfaces

About us

We design and install floors that look like art and perform like construction

Prime Surfaces does two things: we design the surface with you and install it with a measurable technical process. No middleman between the person who recommends the finish and the crew that applies it.

We don’t just make beautiful floors. We design art.

What we do

Design and installation under one roof

We are a Costa Rican company focused on premium epoxy surfaces: seamless floors with no joints or grout, for homes, businesses and industry.

We work with three systems: metallic marble, flake and solid color. Every project starts by testing the concrete and ends with written care recommendations.

We are based in Piedades de Santa Ana. There is no showroom: we come to your space with samples, because a finish should be chosen in the light where it will live.

Prime Surfaces installers broadcasting flake over the epoxy base in a garage

10

completed projects

53

real finishes across three systems

350 psi

data-sheet bond strength

0 VOC

virtually odorless materials

How we work

Four things you can expect

01

Personal attention

One person stays with you from assessment to handover. You know who to message and what comes next.

02

Made-to-order finishes

Color, effect and gloss are decided with you on a physical sample. With metallic, every floor is one of a kind.

03

Trained crew

Installers trained in the systems we apply: mechanical prep, layers and timing per the manufacturer’s data sheet.

04

Residential and commercial

From a garage or living room to shops, offices, warehouses, parking and food or healthcare spaces.

Materials

Made in the United States

We do not mix brands at random. We use complete systems from two manufacturers with published data sheets.

U.S. Resin Supply

EpoxyStarz 100% solids epoxy for the base, ProEpoxy for the metallic finish, SB65 sealer, metallic pigments and pre-mixed colors.

Torginol

Signature Series flake for the flake system: 15 color blends with natural slip resistance.

Epoxy floors

Technical process

What we measure before installing

  • Concrete moisture < 4% (ASTM F1869)
  • pH ≥ 9
  • Surface profile CSP 2+ (ICRI 310.2R)
  • Temperature 10–30 °C and relative humidity < 50%
  • Foot traffic at 24 h, vehicles at 48 h
Process and warranty

Your surface starts with a conversation.

Tell us about the space. The on-site assessment is free and comes with measurements, a system recommendation and a firm quote.