Five steps, measurable data
A process that is measured, not improvised
350 psi
bond strength: the concrete gives way first
24 h
until you can walk on it
48 h
until you can park on it
3–5
business days for a typical install, depending on area and weather
The process
From site visit to handover
Assess
What happens
We visit your space, take measurements and test the substrate: concrete moisture, pH, surface profile and ambient conditions. The assessment is free.
What you get
A clear diagnosis: whether the floor can be installed as is, what preparation it needs, and a confirmed price for your area.
Technical data
- Concrete moisture < 4% · ASTM F1869
- pH ≥ 9
- Surface profile CSP 2+ · ICRI 310.2R
- Ambient 10–30 °C · RH < 50%
Design
What happens
Together we choose the system (metallic marble, flake or solid color) and the finish, based on how the space is used and the light it gets.
What you get
A physical sample of the finish to look at in your own space before you decide, plus a PDF quote.
Technical data
- 31 metallic finishes · 15 flake · 7 solid colors
Prepare
What happens
We mechanically grind or polish the surface with dust extraction, and repair cracks. This step decides the bond, and it is the one that shows over the years.
What you get
An open, clean, level surface ready for resin. Existing tile is assessed and prepared the same way.
Technical data
- Mechanical grinding to CSP 2+
- Crack repair before the base coat
Install
What happens
We apply the layers of the chosen system. Flake: epoxy base, full-broadcast flake, topcoat. Metallic: base, metallic pigment, veining. Solid: base and color.
What you get
A seamless floor with no joints or grout, installed with zero-VOC, virtually odorless materials.
Technical data
- Typical install: 3 to 5 business days
- 100% solids epoxy · zero VOC
Hand over
What happens
We walk the floor with you, point by point, and explain cure times before you use it.
What you get
Written care recommendations: cleaning with a mop and neutral soap, and what to avoid.
Technical data
- Foot traffic: 24 h
- Vehicle traffic: 48 h
No surprises
What you get in writing
- A PDF quote that includes the photo of your space.
- Area measurements and the chosen system and finish.
- Terms: preparation included, estimated timeline and cure times.
- Payment: 50% deposit to schedule the installation, balance on handover.
- At handover: care recommendations.
Want a ballpark before the visit? The price estimator gives you a range in seconds.
Warranty
What stands behind our work
What is covered
- Application defects in the system.
- Adhesion failure over a substrate prepared to the data sheet.
What is not
- Damage from dragging sharp metal objects or from impacts.
- Moisture or structural movement in the concrete after installation.
- Using the floor before the stated cure times.
The exact terms for your project are written into the quote.